Find a Dealer
Home / Products / Mason-Lite Masonry Accessories

Mason-Lite Masonry Accessories

Masonry Chimney

This Masonry Chimney is comprised of two pieces: an inner liner section with a  14″ diameter flu  and an outer liner section. Inner and outer  liners must be ordered together to function properly. We also offer both 4′ and 8′ systems. Other Chimney components that are offered are the Inner Liner Starter Section, the Offset Elbow Section, and Brick Ledge. 

 

Air-cooled Metal Chimney

MFI Distributes Durachimney II air-cooled pipe in sizes 12″,14″, and 16 inch inner diameter flu pipe. This chimney system has been tested and listed on all of Mason-lite wood-burning fireplace systems. 10″ B-Vent is also tested and listed on all Mason-lite gas burning systems.

 

 Masonry Firebrick Panels

Our Masonry Firebrick Panels are easy to install, they come in full running bond or split herringbone. The set consists of two sides, a back and a bottom that fit our  standard firebox sizes of 33″-63″. We also offer a taller firebrick panel kit to fit the needs of a Rumford style Fireplace. Standard installation time is under an hour. See the Instructions for more information on these Masonry Accessories.

 

 

Masonry Arch

This Arch Kit consists of two pieces that are easily mortared in place to give that custom look to the fireplace. This Arch is available to fit models 33″-49″. The Masonry Arch is an extra piece that you can buy with your unit to add that custom feel. See our Masonry Arch Instructions.

 

Metal Base

This Metal Base is used for installation of Mason-lite fireplaces to offer the air clearance necessary for installation on combustible floors. This metal base will raise the 33″,39″,44″, 49″ the 6 inches needs for combustibles. We also offer 8 inch metal bases for the 43″(See-Through) and 63″ models. Check out the Hearth Rebar Locations to ensure proper stability.

 

Mason-lite Rumford Height Kit

This Height Kit consists of a rear wall and two side walls that will increase the height opening by 8″ from the standard opening (giving a Rumford look). With the new size opening be sure to check the Chimney Size Chart to ensure proper flu size. The Mason-lite Rumford Height Kit is compatible with standard fireplace boxes 33″-63″. 

Downloads

Download our product data sheet for more details on the Mason-Lite fireplace system.

Download the Instruction Manual

Product Affiliations

Optional Mason-Lite Brick Panels